- Тype: 2 Bandwidth
- Woofer: 12"
- Tweeter: 1"
Yamaha DZR12 Active Loudspeaker
The Yamaha DZR12 is a 2-way bi-amped powered PA speaker delivering 139 dB maximum SPL through a 2,000 W Class D amplifier and custom 12-inch LF / 2-inch HF transducers. Built for professional live sound, this active loudspeaker incorporates Advanced FIR-X tuning and D-Contour multiband compression to keep clarity at any level.
- With 96 kHz DSP and FIR filtering, the speaker ensures phase-coherent, high-resolution audio reproduction.
- Rotatable constant-directivity horn provides 90° × 60° coverage in both vertical and horizontal setups.
- The plywood cabinet features a polyurea coating and dual pole-mount for flexible deployment.
- For setup, you access EQ, crossover selection, and delay via the LCD display or USB configuration.
Yamaha DZR12 — Professional Powered PA Speaker
Delivering 139 dB maximum SPL from a compact 12-inch two-way enclosure, the Yamaha DZR12 sets a high bar for powered loudspeakers in its class. This bi-amped active speaker pairs a 2,000 W Class D amplifier with custom neodymium transducers — a 12-inch LF driver with a 3-inch voice coil and a 1-inch throat compression driver with titanium diaphragm. Yamaha's 96 kHz DSP engine processes the signal through Advanced FIR-X tuning, combining linear-phase FIR filters with corrective EQ to eliminate phase distortion across the 39 Hz to 20 kHz frequency range.
What Sets the DZR12 Apart
D-Contour is an intelligent multiband compressor that monitors output level in real time and applies frequency-dependent correction, preventing the harshness that typically emerges when pushing powered speakers to their limits. Spectral roll-off is minimized by the rotatable constant-directivity horn, maintaining even coverage whether the enclosure is pole-mounted or used as a floor monitor.
Amplification, Transducers, and Signal Processing
Each specification directly impacts real-world sound reinforcement performance.
- Amplifier Power: 2,000 W Class D — bi-amped configuration with separate channels for LF and HF drivers
- With a maximum SPL of 139 dB, mid-size venues can be covered with a stereo pair.
- Frequency Range: 39 Hz – 20 kHz — extended low-end reduces dependency on subwoofers
- Horn Coverage — the rotatable constant-directivity design delivers 90° × 60° dispersion and adapts to vertical or horizontal placement without spectral roll-off
- Cabinet: 15 mm plywood with polyurea coating
Who Should Consider this Model
This loudspeaker is built for sound engineers, rental companies, and installing professionals who require maximum output without sacrificing tonal accuracy. The DZR12 is the right choice for live sound operators who need a single 12-inch powered speaker that can serve as both a main PA element and a stage monitor. Its locking power connector, USB-based preset management, and built-in delay streamline setup and recall for touring rigs where speed and flexibility are crucial.
DZR Series — The Flagship Line
Representing the culmination of Yamaha's decades of sound reinforcement expertise, the DZR series sits at the top of the brand's powered loudspeaker range. Yamaha developed the Advanced FIR-X tuning and D-Contour algorithms specifically for this platform, drawing on the same acoustics research that informs their larger professional audio products.
Frequency Range: 39 Hz - 20 kHz
The frequency response 39 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Woofer: 12"
Thanks to 12" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.
Bi-Amp: Yes
Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
EQ: Yes
The product is equipped with an equalizer that allows you to precisely adjust the sound to your personal preferences. With the ability to fine-tune different frequency bands, you can easily enhance or reduce specific frequencies to achieve the ideal audio experience tailored to your individual needs and preferences.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Тype
Power (Watt)
Frequency Range
Woofer
Middle Speaker
Tweeter
Display
Yes
Colour
Black
Housing
Plywood Housing
Inputs
USB
Yes
Outputs
Balanced XLR M (2 x)
MP3 / Line In
No
AUX IN
No
Microphone Input
Yes
Offer Configuration
Standard offer
Package Contents
Manual, Power Cable
Power Supply
240V
UK/EU Power supply included
No
Height (cm)
64.6
Width (cm)
41
Depth (cm)
39.4
Weight
21,4 kg
Made in
Indonesia
All reviews come from verified customers who have purchased a product from us in the past.
Documents
Instructions for use
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
