Turbosound TFX122M-AN Active Stage Monitor

Coaxial 12" Active Stage Monitor with Touring-Grade Headroom

The Turbosound TFX122M-AN is a 1,100 W powered 12" two-way floor monitor built for portable speech and music reinforcement. A custom high-excursion 12" low-frequency driver pairs with a 1" titanium-dome compression driver on a low-distortion waveguide, delivering 75 Hz to 18 kHz (±3 dB) and 125 dB peak SPL. Designed to operate without an external controller, the wedge drops straight into touring, club, and theater rigs.

Coaxial Driver Geometry and Klark Teknik DSP

What sets this monitor apart is its coaxial driver geometry: the 1" high-frequency driver sits at the centre of the 12" woofer, so highs and lows radiate from one acoustic point. That layout keeps off-axis response consistent as performers move across the wedge. A Klark Teknik DSP engine adds dynamic EQ, multiband limiting, and position-compensation presets for floor or stand placement.

Power, Drivers, and Connectivity — What the Specs Mean Onstage

Every spec on this wedge is aimed at fast setup and a stable, full-range monitor mix. The Class-D amplifier pushes 1,100 W from a 15 mm plywood cabinet weighing 16.9 kg.

• Output Power: 1,100 W peak — headroom for full-band stage volume
• Drivers: 12" high-excursion LF + 1" titanium-dome HF compression driver — coaxial point-source imaging keeps the mix consistent off-axis
• Frequency Response: 75 Hz to 18 kHz (±3 dB) — full-range vocal and instrument monitoring
• Coverage: 60° H × 40° V rotatable waveguide — aim the wedge at the performer instead of the audience
• Networking: 2x RJ45 ULTRANET, 16 channels / 24-bit over Cat 5 — single-cable digital audio runs replace bulky multicores

Built for Touring Bands, Worship Teams, and Mobile PA Rigs

The Turbosound TFX122M-AN is the right choice for live performers and engineers who need a road-ready wedge with high SPL, consistent coverage, and digital networking. Touring bands benefit from the coaxial driver's uniform off-axis response, keeping vocalists hearing the same mix from any position. Worship teams and AV crews gain fast setup through ULTRANET digital audio runs and DSP presets that compensate for floor or stand placement. Mobile DJs and venue operators get a 1,100 W Class-D wedge that pairs cleanly with active subwoofers via the XLR Thru output.