- Application: Broadcast, Interview, Speech, Stage
- Frequency Range: 20 Hz - 20 kHz
- Polar Pattern: Omnidirectional
- Impedance: 112 Ohm
- Sound Pressure Level (SPL): 137 dB
- Sensitivity: -44 dB, 6 mV
DPA 2061-OL-C-F10 Lavalier Condenser Microphone
The DPA 2061-OL-C-F10 is a professional omnidirectional lavalier microphone built for broadcast, theatre, and live presentation work. Its pre-polarized electret-condenser capsule delivers clear, intelligible speech while handling peak SPLs up to 137 dB. The IP57-rated, sweat-resistant housing and Kevlar-reinforced cable are designed for years of daily use on stage and on set.
- Omnidirectional electret-condenser capsule for consistent off-axis pickup and natural-sounding speech
- Frequency response of 20 Hz – 20 kHz with a +3 dB soft boost between 8 – 16 kHz for added presence
- Maximum SPL of 137 dB (10% THD) handles loud vocalists and presenters without distortion
- Hardwired TA4F Mini-XLR connector pairs directly with Shure, Line 6, TOA, and Beyerdynamic wireless transmitters
- IP57 dust- and water-resistant construction with Kevlar-reinforced 1.5 m cable for rugged daily use
DPA 2061 Lavalier Microphone — Broadcast-Quality Speech in a Miniature Package
The DPA 2061-OL-C-F10 is a professional omnidirectional lavalier microphone engineered for broadcast studios, ENG crews, theatres, houses of worship, and live event venues. Built around a pre-polarized electret-condenser capsule, it captures voice with the clarity and consistency that sound engineers expect from the DPA name. Whether clipped to a lapel, hidden in a costume, or mounted directly on skin, this lavalier delivers intelligible speech at every volume level. Audio professionals who need a discreet, rugged mic that reproduces the human voice with broadcast-grade accuracy will find it a reliable daily tool.
What Sets the 2061 Apart from Other Lavaliers
Unlike most DPA lavaliers, this model uses a fixed capsule design — there are no interchangeable soft-boost or high-boost grids to swap. The result is a very linear effective frequency range from 50 Hz to 16 kHz with a built-in +3 dB soft boost between 8 and 16 kHz for natural presence. The hardwired TA4F Mini-XLR connector eliminates the need for separate adapters, and the IP57-certified housing repels sweat, dust, and moisture for reliable performance in demanding environments.
Omnidirectional Capsule — Consistent Levels from Every Angle
The forgiving omnidirectional polar pattern captures sound equally from all directions, so the speaker's tone stays consistent even when they turn their head away from the mic. This makes the lavalier ideal for theatrical performers, presenters, and broadcast talent who move naturally on stage or in front of the camera.
- Polar Pattern: Omnidirectional — equal sensitivity from all directions for natural-sounding speech
- Capsule Type: Pre-polarized electret condenser — miniature design for easy concealment in clothing or on skin
- Effective Frequency Range: 50 Hz – 16 kHz (±3 dB) — linear response tailored for the human voice
High SPL Headroom — Built for Loud Vocalists and Presenters
Engineered specifically for loud speech and vocals, the 2061 handles peak SPLs that would distort lesser lavaliers. The +3 dB soft boost in the upper register adds presence and intelligibility without sounding harsh, while the low equivalent noise floor keeps quiet passages clean and detailed.
- Maximum SPL: 137 dB (10% THD), 128 dB (1% THD) — handles energetic vocalists without distortion
- Sensitivity: 6.0 mV/Pa — strong output for clean wireless transmission
- Dynamic Range: 102 dB — captures both whispers and shouts in a single take
- Equivalent Noise Level: 26 dB (A-weighted) — quiet self-noise for low-volume speech
Rugged Construction — IP57 Protection and Kevlar-Reinforced Cable
The non-modular design pairs a fixed cap with a hardwired connector for maximum mechanical resilience. The 1.5 m cable is reinforced with Kevlar and fitted with strain relief at both ends, so it survives the rigors of daily stage and field use. Plug-in power from a wireless bodypack keeps setup simple — no external phantom supply required.
- Connector: TA4F Mini-XLR 4-pin female — hardwired for Shure, Line 6, TOA, and Beyerdynamic transmitters
- Cable Length: 1.5 m — generous reach for talent movement
- Operating Voltage: 5 – 10 V plug-in power — powered directly from wireless bodypack
- Environmental Rating: IP57 dust- and water-resistant — repels sweat and moisture
- Dimensions: 5.6 mm diameter × 9.7 mm length — among the smallest professional lavaliers available
- Weight: 10 g — light enough to wear for full-day productions
Who Should Choose the DPA 2061 Lavalier
The DPA 2061-OL-C-F10 is the right choice for broadcast engineers, theatre sound designers, and live-event audio professionals who need a discreet lavalier that delivers intelligible speech in unpredictable environments. Its high SPL handling makes it equally suited to energetic presenters, vocalists, and houses of worship applications where the speaker's voice is amplified or recorded. The hardwired TA4F connector makes it a natural fit for productions already running Shure, Line 6, TOA, or Beyerdynamic wireless systems. For users who need a sweat-resistant, road-ready lavalier with the DPA sound signature, this model sits in a class of its own at this tier.
The DPA 2061 — A New Addition to a Legendary Lavalier Line
DPA Microphones has built its reputation on miniature condenser microphones trusted by broadcast, theatre, and live-event professionals worldwide. The 2061 was introduced as a streamlined addition to the company's lavalier family, sharing the design principles of the acclaimed 4060, 4061, and 6060 series while introducing a fixed capsule and hardwired connector. The result is a more accessible entry point into the DPA lavalier sound — engineered for users who want the brand's signature clarity and ruggedness without the cost of interchangeable accessories.
Frequency Range: 20 Hz - 20 kHz
The frequency response 20 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Polar Pattern: Omnidirectional
The omnidirectional microphone is designed to pick up sound equally from all directions. Unlike directional microphones such as cardioid or supercardioid, the omnidirectional microphone has no directional bias, which means it is equally sensitive to sound coming from the front, side, and rear.
Cable Length
1,5 m
Frequency Range
Frequency Response
20 Hz - 20 kHz
Impedance
Original Colour by Producer
Beige
Signal to Noise Ratio
68 dB
Capsule Type
Offer Configuration
Standard offer
Weight
Made in
Denmark
Documents
Instructions for use
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
