Does the Behringer PMP 4000 EUROPOWER support bi-amping Behringer passive speakers by using its dual amp outputs, and if so, what is the recommended crossover point for optimal performance?

The Behringer PMP 4000 EUROPOWER does not support bi-amping directly, as both amplifier outputs (Main and Monitor) are intended for separate mixes rather than splitting frequency ranges for bi-amping. For optimal speaker performance, use an external crossover if bi-amping is required, and the recommended crossover point is typically around 2.2 kHz to 2.5 kHz for most Behringer passive speakers. Always refer to your specific speaker’s manual for precise recommendations.

Can the Behringer PMP 4000 EUROPOWER safely power a pair of passive floor monitors with 8 ohms impedance each, and if so, what’s the optimal connection method to ensure balanced output without risking overload?

Yes, the Behringer PMP 4000 EUROPOWER can safely power a pair of 8-ohm passive floor monitors. For optimal and balanced output, connect each monitor to its own channel (A and B) on the PMP 4000, running the mixer in stereo mode. This setup ensures even power distribution and reduces the risk of overload, as the PMP 4000 delivers about 300 watts per channel at 8 ohms. Always avoid linking multiple speakers to a single channel to maintain safe operation.

Can I safely run two 8-ohm Behringer passive speakers per channel on the PMP 4000 EUROPOWER without risking overload, and what would be the wattage delivered to each speaker in that setup?

Yes, you can safely run two 8-ohm Behringer passive speakers per channel on the PMP 4000 EUROPOWER. When you connect two 8-ohm speakers in parallel per channel, the total load is 4 ohms per channel, which the PMP 4000 can handle. At 4 ohms per channel in stereo mode, the PMP 4000 delivers up to 500 watts per channel. This means each 8-ohm speaker will receive up to 250 watts since the 500 watts is shared between the two speakers on that channel. This setup is safe and will not risk overloading your amplifier.

Behringer PMP 4000 Power Mixer

4.70

40 x rated

Brand: Behringer

Product code: 15672 (PMP4000_EU1)

Behringer PMP 4000 Power Mixer

4.70

40 x rated

Brand: Behringer

Product code: 15672 (PMP4000_EU1)

€384

In stock > 5 pcs.

Report a better price

Guard the price

384 points

Behringer PMP 4000 Power Mixer

€384

stereo preamp outputs, 3D stereo surround effect, class D amplifier technology, 2x 800W/4 Ohms (1600W bridged, 4x stereo), adjustable aux input, 2x aux outputs, 3-band EQ with lo-cut filter and clip LEDs on each mono channel, 7-band graphic EQ, master and monitor outputs, 24bit multi-FX processor, 8x mic preamps with 48V phantom power, FBQ...