ART SPLIT MIX 4DI-Box/Splitter Product code: SPLITMIX4 Four-channel fully passive hybrid mixer/splitter with 4 stereo input channels and 1 stereo output that offers a wide variety of configurations: it allows mixing of 4 stereo input channels down to 1 stereo output, splitting a stereo input signal to distribute 4 stereo output channels, or combining of the configurations for a wide range of applications. It can even be configured as 4 stereo input channels thru independent level attenuators to 4 stereo output channels. All 1/4" connections are stereo TRS and have intelligent switching. Mixer also provides stereo level control on each channel, while level attenuators offer over 90 dB of attenuation and channel isolation. Stereo or mono operation is determined by the type of 1/4" plug and cabling. Fully passive design has no active circuitry to add noise or distortion, and handles virtually any signal level. Dimensions: 47 x 117 x 104 mm. Weight: 380 g.In stock for online shop 3 pcs
ART DUALXDirectDI-Box/Splitter Product code: ART-DUALXDIRECT Dual reamping direct box. The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 6,35 mm and XLR inputs are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. Frequency response: 10 Hz - 100 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,38 kg.In stock for online shop more than 5 pcs
ART DUALZDirectDI-Box/Splitter Product code: DUALZDIRECTIn stock for online shop more than 5 pcs
ART dADB Dual Active Direct BoxDI-Box/Splitter Product code: DADB Compact dual active direct box that acts as two independent, high quality active interfaces for connecting instrument, line, or speaker level signals to balanced inputs and delivers an extremely flat and wide frequency response even at high input levels. The high impedance 6.3mm inputs are buffered and converted by extremely low noise active electronics to deliver isolated, balanced, low impedance outputs. Input attenuation on each channel allows for a wide range of source signal levels. Independent parallel thru jacks allow for tapping the signal chains. A Ground Lift on each channel allows for totally separate the input and output signal grounds to isolate two systems when required, thus reducing hum and ground-loop noise. Switchable low pass Bessel filters eliminate high frequency interference. Operating outside of the audio range these complex and effective filter circuits are primarily intended to eliminate radio frequency interference before it gets into the main system. They also effectively reduce digital computer noise making it the ideal DI solution for laptops, computer workstations and peripherals when used in stereo PA applications. The unit’s active circuitry is powered by phantom power or by an internal 9V battery when external power is not available. Low current draw (less than 7.5 mA) should provide more than 100 hours of operation with a new battery (alkaline recommended). The compact black all steel case and active design ensure unmatched long-term reliability in live sound, permanent/fixed installations, DJ applications, or virtually any PA application. Dimensions: 51 x 127 x 146 mm. Weight: 1.22 kg.In stock for online shop 1 pcs
Miktek DI1 BoxDI-Box/Splitter Product code: MIKTEK-DI1 Active 1-channel direct box to provide a direct insertion of an audio signal into a mixer or recorder. A variety of audio signals can be connected to your DI-1, e.g. guitars, bass guitars, drum machines, keyboards, outboard signal processors, etc. Besides that the DI-1 is also useful for connecting imbalanced signals such as DJ mixers, effects processors and keyboards to a main PA or recording mixer. The DI-1 can be powered either by a single 9 volt battery or standard 48 volt phantom power. The DI-1 enables you to tap off the signal from a guitar or bass guitar and pass the signal from the THRU output to the guitar / bass guitar amplifier without affecting the original sound. The OUTPUT connection gives cancellation of hums/buzzes while leaving the original signal clean and pure. The device comes in a sturdy aluminum shell with stabilizing rubber grip feet.In stock for online shop 1 pcs
DI-Box/Splitter / Product code: DTI / ID: 15576
ART DTI:dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, and RCA type phono jacks, unbalanced, 1/4" TRS, 1/4" TRS, Weight 0,34 kg
Product rating:ART DTI
Do you own ART DTI, or have you had a chance to try it?
Write a review and share your opinion with others
12. 4. 2018: 50Hz hum eliminálva. :)
20. 12. 2017: Dobrý, jednoduchý, variabilní.