Palmer

Palmer CAB CASTORS Product code: PCABCASTORS Castor set with 4 castors incl. screws for bass or guitar cabinets. Features: Type: swivel castor, Wheel diameter: 50 mm, Accessories (included): 12 x Flat-head Screw 19 mm black, Height: 72 mm, Construction: swivel castor with brake, swivel castor w/o brake, Cabinet material: steel, Material thickness:

In stock for online shop 1 pcs

12.90 €

Palmer CAB M Product code: PCABM Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg

In stock for online shop 1 pcs

27 €

Palmer MCT DMX Product code: AHMCTDMX This cable tester checks 3-pin and 5-pin DMX cables for continuity in fully automatic or manual pin selection modes. Pin connection status of the male and female cable ends is indicated by two rows of bright LEDs. In addition, the unit's 3-pin connectors can also be used to test XLR microphone cables. The DMX Cable Tester comes with two L-brackets for variable mounting options. Operating voltage: 2 x AA battery. Dimensions: Width: 240.2 mm, Height: 48 mm, Depth: 53 mm, Weight: 0.7 kg

In stock for online shop 1 pcs

29 €

Palmer AHMCT 8 Product code: AHMCT8 The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers - both in the workshop and on stage. The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands. The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations. Features: Solid metal housing, powered by a 9-V block battery, Connectors - DIN 5-pin, Banana plug, XLR, RCA, Speakon, 4-pin, 6.3 mm Jack, additional continuity tester with measuring probes, Indicators - battery status, LED chain, Controls - down, Power On/Off, up, volume. Width - 105 mm, Depth - 145 mm, Weight 0.64 kg

In stock for online shop 2 pcs

35 €

Palmer PAN 01 Product code: PAN01 Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Channels:1, Inputs: 1, Input connectors: 6.3 mm Jack, Max. input level: + 54 dBu. Input impedance:

In stock for online shop 1 pcs

39 €

Palmer PAN 05 Product code: PAN05 Microphone merger. The PAN-05 enables you to patch two microphones into one single mixing desk channel in situations where you run out of channels. Since decoupling occurs via a balanced resistor network, the PAN-05 also lets phantom power "pass through", useful for condenser microphones. However, due to the difference in sound and signal level, mixing dynamic and condenser mics should be avoided. Best results will be achieved using two identical mics. Dimensions: 135 x 60 x 35 mm, weight: 0,26 kg

In stock for online shop 2 pcs

39 €

Palmer Pocket Chorus Product code: PEPCHOR Chorus effect for guitar in pocket format. Produces velvety sounding Chorus effect. Controls include depth, rate, Speed. Robust steel housing. Powered by 9 V DC power supply (not included) or 9 V block. Dimensions: 100 x 60 x 55 mm. Weight: 0,25 kg. In a grey finish.

In stock for online shop 1 pcs

45 €

Palmer Pedalbay 50 S Product code: PPEDALBAY50S Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 500 x 135 x 35 mm. Weight Pedalbay: 2,46 kg. Accessories (included): 2x black elastic bands, approx. 1.5m hook tape, soft carrying case with shoulder strap.

In stock for online shop 1 pcs

45 €

Palmer Dms Product code: PEDMS Switch effect for dynamic microphones. Switch your vocal mic between the FOH and monitor mixing desks. Two different sound configurations: to switch between different effects or sounds on your microphone, you can also use the DMS to route the signal to two rooms or zones and select either one. Robust steel housing. Not powered. Dimensions: 120 x 100 x 60 mm. Weight: 0,65 kg. In a grey finish.

In stock for online shop 1 pcs

47 €

Palmer PAN 04 Product code: PAN04 Passive 2-channel DI Box. The PAN-04 consists of a housing containing the equivalent of two PAN-01s, making it a dual channel passive DI box. This „stereo" configuration makes it ideally suited for use with certain keyboards and devices which have several outputs.ive DI box. Jack input with paralell „THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals. Dimensions: Width: 110 mm, Depth: 110 mm, Height: 45 mm - Weight: 0.419 kg

In stock for online shop 2 pcs

69 €

LIMITED EDITION

Palmer Monicon W Product code: PMONICONW The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Dimensions: 164 x 62 x 85mm. Weight: 0,75 kg. In a white finish. Limited white edition.

In stock for online shop 2 pcs

69 €

Palmer Monicon Product code: PMONICON The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs. The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Dimensions: 164 x 62 x 85mm. Weight: 0,75 kg

In stock for online shop 2 pcs

69 €

Palmer PLI 06 Product code: PLI06 Line Level Converter 2 In 1 Out. Dedicated interface to feed the unbalanced stereo signal typically provided by a laptop to the balanced (mono) microphone inputs of professional mixing desks. It mixes the stereo output to mono while impedance matching and signal balancing are achieved by a high quality audio transformer especially designed for the unit. Moreover, it also prevents ground loops and the annoying hum they result in. Is entirely passive and does not require mains power or batteries. Dimensions: 120 x 60 x 35 mm. Weight: 0,25 kg

In stock for online shop 1 pcs

79 €

Palmer PAN 01 PRO Product code: PAN01PRO PAN01 PRO is the deluxe version of Palmer's top selling passive DI box PAN01. It features a 2 mm steel housing and heavy duty metal switches for the PAD and ground lift functions to withstand the rigors of the road and stage. The transformer has been completely redesigned and upscaled with a larger magnet core for increased dynamic range and headroom, and a metal cover for improved shielding. Also, the PAN01 PRO's parallel out is now switchable to double as additional input. This feature enables the summing of a stereo output (e.g. of a keyboard) with the resulting mono signal present at the PAN01 PRO's balanced XLR output.The PAN01 PRO comes with a high quality reinforced nylon bag with cutouts for connecting the box inside the bag. Features: Channels: 1, Inputs: 2, Input connectors: 6.3 mm Jack, Max. input level: + 62 dBu, Input impedance: 68 k Ohm(s), Input pad: 0 / -30 dB, Outputs: 1. THRU outputs/channel: 1, Output connectors: 6.3 mm Jack, XLR, Max. output level: + 4 dBu, Output impedance: 200 Ohm(s), Frequency response:

In stock for online shop 2 pcs

85 €

Palmer PDI 09 Product code: PDI09 Passive DI box especially designed for guitars. The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow", "Normal", or "Bright". Dimensions: 120 x 60 x 35, Weight: 0,284 kg

In stock for online shop 1 pcs

89 €

Palmer BATPACK 8000 Product code: PBATPACK8000 Rechargeable Pedalboard Power Supply, 8000 mAh. The Palmer Bat Packs are purpose-designed to power multiple stompboxes and pedalboards. They feature high grade, long-life lithium polymer batteries providing 500 mA each from two 9 volt DC center negative barrel outputs that are fully regulated. Recharging the 4,000 mAh capacity Bat Pack 4000 takes approximately four hours and twice that for the 8,000 mAh Bat Pack 8000. Both come in low-profile all-metal enclosures with 5-segment battery status indicators and convenience type A USB port for charging smartphones or tablets. Run time depends on your pedals' current draw. Dimension: 195 x 83 x 25 mm, Weight: 0,4 kg

In stock for online shop 1 pcs

98 €

Palmer Guitars

Palmer Basses

Palmer Microphones

Palmer Studio

Palmer Stage Equipment

Palmer Headphones

Palmer Accessories