- Тype: Active
- Power: 2500 W
- Woofer: 15"
- Tweeter: 1"
Turbosound iQ15 Active Loudspeaker
The Turbosound iQ15 is a 2,500-watt powered 15" loudspeaker built for portable PA and fixed installation. Klark Teknik Class-D amplification, onboard DSP, and Ultranet digital networking give it the headroom and flexibility to handle live bands, DJs, and houses of worship. At 26.1 kg with a fiberglass-reinforced composite enclosure, it stays portable without sacrificing output.
- 2,500 W Class-D power with 132 dB peak SPL fills medium and large rooms
- Klark Teknik DSP with speaker modelling, EQ, delay, limiting, and feedback elimination
- Ultranet Cat-5 digital networking plus USB-B for PC remote control
- This cabinet features two combo XLR/jack mic-line inputs with dedicated gain and a mix output, making daisy-chaining between units straightforward for any event setup.
Turbosound iQ15 — 2,500 W Powered 15" PA Speaker
The Turbosound iQ15 is a 2,500-watt two-way powered loudspeaker designed for portable PA and fixed installation. A 15" low-frequency driver pairs with a 1" titanium dome compression driver to deliver full-range response from 42 Hz up to 20 kHz, while the Class-D amplifier pushes peak SPLs of 132 dB. This model is the right choice for bands, DJs, and venues that need serious output without dragging a rack of outboard gear on the road.
What Sets the iQ15 Apart in Its Class
With Klark Teknik DSP at its core, the iQ15 provides speaker modelling, parametric EQ, delay, transparent limiting, and automatic feedback elimination—all editable from the rear-panel LCD or via PC remote software. Streaming 16 channels of audio over a single Cat-5 cable, Ultranet digital networking drastically reduces stage clutter when used with a compatible mixer. At just 26.1 kg, the fiberglass-fortified composite enclosure allows for easy transport and offers M10 rigging points for flown installations.
Connectivity, Power, and Practical Specs
Every input a working sound engineer needs is on the back panel of the iQ15: two combo XLR/jack sockets with switchable mic/line gain, a mix output XLR for daisy-chaining, dual RJ45 Ultranet ports, and a USB-B jack for computer control. For power, a locking PowerCon connector with link-out lets you chain electricity between cabinets. Adjust the dual-angle 36 mm pole socket to support both level and tilted floor positions, enhancing audience coverage at any venue.
- LF Driver: 15" with low-mass voice coil paired with a 1" titanium dome compression driver — tight transients and extended highs
- The frequency range spans from 42 Hz to 20 kHz, giving you full-range output that covers vocals, instruments, and bass-heavy playback for professional gigs.
- Amplifier Power: 2,500 W Klark Teknik Class D with 132 dB peak SPL — enough headroom for medium and large rooms
- Inputs: 2 × Combo XLR/Jack, 2 × RJ45 Ultranet, USB-B — analogue and digital signal paths on one back panel
- Microphone Input: Yes — two switchable mic/line channels with dedicated gain knobs for direct vocal connection
- Pole Mount: 36 mm dual-angle flange plus M10 rigging points for flown installs
Who the iQ15 Is Built For
Mobile DJs, solo musicians, small-to-medium bands, and rental houses benefit from a single cabinet capable of front-of-house duty in clubs, school halls, and corporate events. With onboard DSP and Ultranet connectivity, installed AV setups in houses of worship and conference rooms enjoy cleaner cable management by running just one Cat-5 instead of a multi-core analogue snake. Users with Behringer X32 or M32 digital mixers gain immediate workflow advantages from the Ultranet link.
Frequency Range: 42 Hz - 20 kHz
The frequency response 42 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Woofer: 15"
Thanks to 15" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.
Inputs
- Ethernet
- Combo (XLR/Jack)
- USB-B
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Тype
Power (Watt)
Power
Frequency Range
Woofer
Tweeter
Display
Yes
Colour
Black
Housing
Plastic
Inputs
USB
Yes
Outputs
XLR (3 x), AC (2 x)
Memory Card Slot
No
AUX IN
No
Microphone Input
Yes (2)
Sound Pressure Level - SPL (dB)
Package Contents
Manual
Package Quantity (pcs)
1
Battery Operation
No
Power Supply
powerCON
Height (cm)
71.1
Width (cm)
45
Depth (cm)
38.1
Net Weight (kg)
26.1
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
