Choose country for shipment delivery

Rode NT55-MP Overhead microphone

Product code: 315348 (NT55-MP)

Rode NT55-MP Overhead microphone

Product code: 315348 (NT55-MP)

€709
In stock 1 piece
Happy Hours - use the code  HAPPY-HOUR-ONLY-NOW at checkout and get a special discount on this product! This offer is time-limited.
Overhead microphone Rode NT55-MP Overhead microphone

Rode NT55-MP Overhead microphone

€709
Certified matched pair of externally biased condenser microphone from RØDE. Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable...
  • Frequency Range: 20 Hz - 20 kHz
  • Polar Pattern: Cardioid, Omnidirectional
  • Impedance: 100 Ohm
  • Sound Pressure Level (SPL): 136 dB

Rode NT55-MP Overhead microphone

Certified matched pair of externally biased condenser microphone from RØDE. Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

  • Finished in durable satin nickel
  • Cardioid or Omni polar pattern using included interchangable capsules
  • Gold sputtered 0.50" capsule
  • Three position PAD – 0 dB, -10 dB and -20 dB
  • Three position High-Pass Filter - flat, 75 Hz and 150 Hz
  • Low noise
  • The NT55 is designed and made in Australia
  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter with bipolar output buffer
  • Capsule: 0.50"
  • Polar Pattern: Cardioid, Omnidirectional
  • Address Type: End
  • Frequency Range: 20 Hz - 20 kHz
  • Output Impedance: 100 Ohm
  • Maximum SPL: 136 dB
  • Maximum Output Level: 8.0 mV (@ 1 kHz, 1% THD into 1 KOhm load)
  • Sensitivity: -38.0 dB re 1 Volt/Pascal (12.60 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
  • Equivalent Noise Level (A-weighted): 15 dBA
  • Power Options: +48 V phantom power
  • Output: XLR
  • Dimensions: 145 x 20 x 20 mm
  • Weight: 110 g
Frequency Range

Frequency Range: 20 Hz - 20 kHz

The frequency response 20 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.

Polar Pattern

Polar Pattern

  • Omnidirectional
  • Cardioid
Impedance

Impedance: 100 Ohm

This value indicates the electrical resistance of the device to an alternating current. Common in microphones and musical equipment, 100 Ohm helps determine compatibility with preamps, mixers, and other audio gear.

Sound Pressure Level (SPL)

Sound Pressure Level (SPL): 136 dB

High SPL levels up to 136 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.

Features

Polar Pattern

Cardioid, Omnidirectional

Properties

Frequency Range

20 Hz - 20 kHz

Impedance

100 Ohm

Acoustics

Sound Pressure Level (SPL)

136 dB

Package

Offer Configuration

Standard offer

Dimensions and Weight

Weight

110 g

Country

Made in

Australia

Buy Rode NT55-MP Overhead microphone in discounted set.

SET with discounted accessories. Accessories and consumables will be necessary sooner or later. Buy them now and save yourself some money and time. You will not have to deal with it later. Additionally, you can be sure the accessories in the SET will fit your product.

Available sets:

Documents

Manufacturer information
Manufacturer:
Hyperactive Audiotechnik GmbH
Neukirchner Straße 18, 65510, Hünstetten, Germany
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.