Choose country for shipment delivery

RCF P1108-T Passive Loudspeaker

Product code: 235926 (RCF-P1108-T)

RCF P1108-T Passive Loudspeaker

Product code: 235926 (RCF-P1108-T)

€693
Pre-orders only
The delivery time will be specified after ordering from our supplier.
Based on your order, we will try to restock the goods and contact you with a delivery date. If you don't want to wait, check alternative products (2).
Passive Loudspeaker RCF P1108-T Passive Loudspeaker

RCF P1108-T Passive Loudspeaker

€693
The P1108-T is a weatherproof full range, wide-dispersion, two way loudspeaker system suitable for several indoor or outdoor applications where good speech intelligibility and music reproduction are required. In a single-piece rotational moulded UV protected polyethylene cabinet the P1108-T combines a 1,5” diaphragm assembly compression driver...
  • Woofer: 8"
  • Tweeter: 1"
  • Power: 400 W

RCF P1108-T Passive Loudspeaker

The P1108-T is a weatherproof full range, wide-dispersion, two way loudspeaker system suitable for several indoor or outdoor applications where good speech intelligibility and music reproduction are required. In a single-piece rotational moulded UV protected polyethylene cabinet the P1108-T combines a 1,5” diaphragm assembly compression driver loaded on a 1” rotatable constant directivity 90°x60°CD horn with a 8” high efficiency low-frequency transducer with a 1.5” voice coil. The cabinet is equipped with 4 x M 8 brass inserts and a steel U-Bracket. The front logo is in aluminium and rotatable. The grille is in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing. P1108-T is suitable for indoor and outdoor installations, it meets the requirements of IP 55 code (International Protection Rating).Features100 W RMSWeatherproof cabinet IP 55Aluminium grill and stainless steel bracketOne 8" high-output LF transducer with 1.5" voice coilOne RCF Precision 1" Compression Driver with 1.5" voice coil90° x 60° constant directivity horn2° x 15° enclosure sides for cluster configurationsPTC Driver ProtectionLICC (Low Impedance Compensated Crossover) network2 metres 4 x 1.5 Input cableAcoustical SpecificationsFrequency Response -10 dB: 80 Hz ÷ 20000 HzMax SPL @ 1m: 121 dBHorizontal coverage angle: 90°Vertical coverage angle: 60°Directivity index; Q: 11System Sensitivity: 95 dBNominal Impedance: 16 Power Handling: 100 WPeak Power Handling: 400 WRecommended Amplifier: 200 WProtections: Dynamic protection on Compression DriverCrossover frequencies: 2200 Hz TransducersCompression Driver: 1" throat, 1.5" coil diaphragm assemblyNominal Impedance: 8 Input Power Rating: 20 W AESSensitivity: 107 dBWoofer: 8" woofer, 1.5" voice coilNominal Impedance: 16 Input Power Rating: 100 W AESSensitivity: 94 dB Input SectionInput connector: 4 x 1.5 mm square 2 m Neoprene cableConstant voltage transformer: 70/100Power Selection: 70V/30W, 15W - 100V/60W, 30W CabinetCabinet Material: 8 mm Polyethylene rotomouldedHardware: 4 x M8 + U-Bracket and Pair of spacersGrille: Custm perforated aluminium grille with open-cell fiber and water repellent woven fabric backingColour: Grey Physical SpecificationsHeight: 266/10.47 mm/inchWidth: 493/19.40 mm/inchDepth: 250/9.84 mm/inchNet Weight: 12,5/27.55 kg/lbs.

Woofer

Woofer: 8"

Thanks to 8" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.

Sound Pressure Level (SPL): 121 dB

High SPL levels up to 121 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.

Features

Speakers

1x 8 "

Properties

Woofer

8"

Tweeter

1"

Power

400 W

Power (Watt)

400

Acoustics

Power RMS

100 W

Sound Pressure Level (SPL)

121 dB

Sound Pressure Level - SPL (dB)

121

Country

Made in

Italy

Documents

Safety instructions

Please refer to the user manual for the specific safety instructions for this product.