Behringer CT200Cable Tester Product code: CT200 Microprocessor-Controlled 8-in-1 Cable Tester. Make sure every cable in your arsenal is in good working order with the invaluable CT200 Cable Tester. This incredibly portable audio solution is a must-have for sound engineers and musicians alike. The CT200 accepts every type of cable you might use in a recording or live performance situation: XLR, Speakon, TRS ( 1/4 ", 1/8"), RCA, RJ45, MIDI and USB. Choose from 3 diagnostic modes: Cable Test, installed Cable Tester or Tone. The CT200 can check for continuity, intermittent or shorted connections, the presence of phantom power and grounded shields. Because this handy tool runs on two AA batteries, you can carry it in your pocket and be ready to troubleshoot at a moment's notice. The CT200 Cable Tester is the smart, portable and unbelievably affordable way to ensure your next show or recording session runs smoothly. With the trustworthy CT200 in your kit - a faulty cable will never come between you and your audience!In stock for online shop more than 10 pcs
Palmer AHMCT 8Cable Tester Product code: AHMCT8 The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers - both in the workshop and on stage. The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage demands. The standard kit comes with two test probes for carrying out fast and simple continuity tests on various cables or installations. Features: Solid metal housing, powered by a 9-V block battery, Connectors - DIN 5-pin, Banana plug, XLR, RCA, Speakon, 4-pin, 6.3 mm Jack, additional continuity tester with measuring probes, Indicators - battery status, LED chain, Controls - down, Power On/Off, up, volume. Width - 105 mm, Depth - 145 mm, Weight 0.64 kgIn stock for online shop 2 pcs
Behringer CT 100 CABLE TESTERCable Tester Product code: CT100 Portable and user-friendly 6-in-1 cable tester for XLR, 1/4" TRS, 1/8” TRS, TT TRS, RCA and MIDI cables that performs continuity check, intermittent contact check, phantom power, and ground shield check. Device provides three microprocessor-controlled modes: Cable Test, Installed Cable Test, and Tone Test; and features clear LED display. Tester is powered by two AA batteries (not included). Belt clip is included.In stock for online shop more than 10 pcs
Omnitronic LH-085Cable Tester Product code: LH-085In stock for online shop 2 pcs
dbx CT-2 Cable TesterCable Tester Product code: DD-CT-2 We all know how frustrating and time consuming it can be when your audio cables fail. With the dbx CT2 cable testing unit you can now evaluate a large variety of your cables with ease. The CT2 offers many common connectors such as Speaker Twist, XLR, Phono, BNC, DIN, TRS, TS, DMX, & Banana. The CT2 allows for testing cables even with different connectors at each end. For example, it is simple to test a TRS to XLR cable. With well illuminated LED indicators and a simple rotary dial, users can quickly establish whether a cable is wired and functioning correctly, or if it is dead and in need of repair.In stock for online shop 2 pcs
Cable Tester / Product code: MTEST-1 / ID: 272354
Mackie MTEST-1:Whether you have a few or a mountain of cables, it pays to know which ones are good and which ones need to be tossed into the not so good pile. The MTEST-1 is an incredibly handy tool that can weed out the cables that may have seen too much action. Male and female connectors for all the most commonly used types. XLR to TRS? 1/8'' to RCA? No problem! The MTEST-1 intelligently knows what you're plugging in and matches pins accordingly. Don't see the connector you need? Just plug in the included probes and you can test continuity on virtually any cable or non-active circuit. Bright and easy-to-read LED readout tells you exactly which pins are working properly. When you have some testing to do on the fly, you don't have time for an AC adapter. Just pop in a 9v battery and the MTEST-1 is good to go. The MTEST-1 is built to last and withstand years of use thanks to its road-worthy, steel construction, and long-wearing components. Colour: Black.
Product rating:Mackie MTEST-1
Do you own Mackie MTEST-1, or have you had a chance to try it?
Write a review and share your opinion with others