Palmer Y-BOXDI-Box/Splitter Product code: PGA03 Splitter effect. Converting the hi-Z guitar signal, the FET input circuitry also drives a transformer which routes the ungrounded signal to the output to eliminate ground loop hum. 9V battery operation is recommended. Can also be used as a line driver for long cable runs and features a phase reverse switch for the AMP 2 output when using pre-amps. Robust steel housing. Dimensions: 120x 80x 45mm. Weight: 0,58 kgIn stock for online shop 1 pcs
Samson MD2 ProDI-Box/Splitter Product code: SAMSON-MD2PRO Samson's MD2 Pro Stereo Passive Direct Box combines two premium direct boxes in a single case. Rugged, roadworthy construction and two shielded transformers provide high-quality signal connection solutions for a variety of live sound and recording applications. The MD2 Pro is perfect for converting unbalanced stereo line level or instrument signals from keyboards, electronic drum kits, acoustic-electric guitars and more.In stock for online shop 1 pcs
Radial StageBug SB-1 Active Acoustic DIDI-Box/Splitter Product code: SB-1-RADIAL The Radial SB-1 Acoustic is a high-performance active direct box made for players that are on the move. Made to fit inside a guitar case, the SB-1 is the smallest Radial DI box ever! But don't let the small size deter... this ultra-compact StageBug sounds absolutely terrific! The design begins with standard ¼ instrument input with a thru-put to feed your tuner or your on-stage amp. The ultra-quiet active circuit at once converts the signal from high to low impedance to reduce susceptibility to noise. The signal is then buffered and balanced for long cable runs to the PA system. 48 volt phantom provides the power, so the SB-1 does not require batteries or external supply to make it work. You simply plug in and you are ready to go! The active circuit features a carefully selected 800k-ohm input impedance to eliminate problems with loading while delivering a crisp, clear sound to the audio system. This delivers extra sparkle to the top end when interfacing vintage guitars with low output pickups and is particularly handy should you plan to use it for recording or Reamping. The SB-1 is also equipped with a -15dB pad that reduces the input sensitivity to gracefully handle even the loudest active instruments. This makes the SB-1 perfectly well suited for electric bass and keyboards. To reduce feedback, toggling the 180° polarity switch helps eliminate hot spots on stage that can cause low frequency resonance. Features Active direct box for acoustic guitar Ultra compact to fit in your guitar case Plug & play easy to use feature set 48V phantom powered, no batteries neededIn stock for online shop 1 pcs
ART Dual RDBDI-Box/Splitter Product code: ART-DUALRDB Dual reamping direct box. The Dual RDB is the ideal interface solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or 6,35 mm instrument level inputs. The unit has two high quality isolation transformers that prevent ground loops when connecting various systems together. Frequency response is 20 Hz - 20 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,40 kg.In stock for online shop 2 pcs
Palmer PLI 06DI-Box/Splitter Product code: PLI06 Line Level Converter 2 In 1 Out. Dedicated interface to feed the unbalanced stereo signal typically provided by a laptop to the balanced (mono) microphone inputs of professional mixing desks. It mixes the stereo output to mono while impedance matching and signal balancing are achieved by a high quality audio transformer especially designed for the unit. Moreover, it also prevents ground loops and the annoying hum they result in. Is entirely passive and does not require mains power or batteries. Dimensions: 120 x 60 x 35 mm. Weight: 0,25 kgIn stock for online shop 1 pcs
DI-Box/Splitter / Product code: MDB-1A / ID: 272352
Mackie MDB-1A:From acoustic guitars to laptops, always sound your best with MDB Series Direct Boxes. Available in four different models, the MDB Series will give you the peace of mind that your sound will faithfully get to your audience the way that you hear it on stage. Direct boxes are an essential tool for any stage or studio. They make it easy to get clean, low-noise audio to a mixer no matter what instrument you are using. Available in four versatile models, our ultra-affordable DI's offer the Mackie sound quality that you expect with Built-Like-A-Tank™ construction for maximum reliability. From acoustic guitars to laptops, be ready for anything with MDB Series direct boxes. With four models to choose from, you can get the perfect match for your instruments. Acoustic guitars and keyboards are right at home with the MDB-1P and MDB-2P. High output instruments will appreciate the extra headroom in the MDB-1A. From the inside out, MDB Series direct boxes are built to last. Thick steel chassis, impact resistant corners, and long-wearing jacks will keep these in your bag for years to come. MDB Series direct boxes offer excellent noise performance and transparency. Whether you are in the studio or performing on stage, your instruments will always sound as good as they do at the source. The MDB-USB is the ultimate way to get pristine digital audio from your laptop directly to a mixer or front-of-house in a venue. This model features: High impedance 6,3 mm Jack in with Thru option, Balanced male XLR out with ground lift, low cut and polarity switch, -20dB pad function, 48 V phantom power. Colour: Black.
Product rating:Mackie MDB-1A
Do you own Mackie MDB-1A, or have you had a chance to try it?
Write a review and share your opinion with others