Light4Me SID4 Lighting Effect

SID4 is a moving 4-in-1 lighting multi-effect for DJs, bands and event organizers that combines a dynamic Magic Ball effect, laser, ring and white strobe in one compact housing. It works well at weddings, in clubs, on small stages, during school performances and in mobile DJ setups. In practice, one fixture can create rhythmic dance floor lighting: colorful Magic Ball beams rotate above dancing guests, the Ring emphasizes the tempo of the music and the white strobe accents the chorus or peak moment of a set. Choose LIGHT4ME SID4 if you are looking for a DMX lighting effect with a wireless remote, 540° Pan movement and infinite Tilt rotation.

Four lighting effects in LIGHT4ME SID4 create a dynamic event setup
LIGHT4ME SID4 combines Magic Ball, Ring, laser and White Strobe effects, so one fixture can work as the centerpiece of a small lighting setup. Magic Ball uses eight 3W R/G/B/W LEDs, the ring has fourty-two RGB 0.2W LEDs and the red and green lasers, each rated at 50 mW, add a spatial character. The 10W CW White Strobe creates cool white flashes that are useful for energetic club music.

The 0-540° Pan movement and dual-section 0-360° Tilt let you spread light across a room, dance floor or stage without a static lighting feel. Bidirectional infinite Tilt rotation with adjustable speed helps match the movement tempo to a calm first dance, a wedding dance block or an intense club set.

Simple operation for beginners and DMX control for lighting operators
LIGHT4ME SID4 can be used without a DMX controller by choosing auto, sound, master/slave or wireless remote operation. Two automatic programs with adjustable speed and two sound programs with adjustable microphone sensitivity let you quickly match the lighting to the music, even during a spontaneous party.
For more advanced work, 16-channel DMX control is available, along with 3-pin XLR-type DMX data input and output and the option to connect up to 32 fixtures in one DMX line. An intuitive control panel with a 4-button LED display, display backlight control, display orientation flip and fixture reset shorten setup time during truss installation.

Key advantages of LIGHT4ME SID4
This moving lighting multi-effect solves several common mobile lighting problems: limited space, the need for quick setup and lack of time for complicated programming. A linear 0-100% dimmer, 0-20 Hz strobe, 6 built-in shows and 31 dynamic Ring macros let you create different moods: from calm background lighting to an intense club sequence.
Choose LIGHT4ME SID4 to expand lighting for a wedding, corporate event or school stage without putting together several separate effects.

Technical specifications:

• Device type: moving LED DMX lighting multi-effect with wireless remote and mounting bracket
• Light sources:
  • Magic Ball: 8x3W R/G/B/W LED (R2/G2/B2/W2)
  • Ring: 42x0.2W RGB LED 3-in-1
  • Laser: red 50 mW, green 50 mW
  • White Strobe: 10W CW LED
• Pan movement: 0-540°, adjustable speed
• Tilt movement: 2 sections, 0-360° rotation, bidirectional infinite rotation with adjustable speed
• Magic Ball light source color palette: RGBW (red, green, blue, white)
• White Strobe light color: CW (cool white)
• Dimmer: linear, full-range (0-100%)
• Strobe effect: 0-20 Hz, adjustable operating frequency
• Built-in shows: 6 shows (4 Magic Ball shows - R/G/B/W colors, White Strobe show, laser show)
• Ring dynamic macros: 31 macros, adjustable speed
• Auto mode programs: 2 programs, adjustable program speed
• Sound mode programs: 2 programs, adjustable microphone sensitivity
• Control: automatic, DMX, infrared wireless remote, manual
• Remote battery: CR2025
• Control panel: LED display (7-segment, 4-digit) + 4 buttons
• Operating modes: auto, DMX, master/slave, sound
• DMX channels: 16
• DMX data connectors: 3-pin male XLR (input) / female XLR (output)
• Power connector: IEC C14 male (input)
• Multi-fixture connection option (DMX signal daisy-chain): yes
• Maximum number of fixtures in one DMX line: 32
• Power cord length: 1.5 m
• Power supply voltage: AC 100-240V, 50/60 Hz
• Power consumption: 50W
• Fuse: 5A
• IP protection rating: IP20
• Cooling system: active (fan cooling)
• Display backlight control: yes
• Display orientation flip: yes
• Device reset: yes
• Floor operation and stand or truss mounting option: yes
• Mounting hole in bracket: M6
• Housing material: ABS plastic
• Mounting bracket material: powder-coated iron
• Device color: black
• Device dimensions: 26.3 x 15 x 24.3 cm
• Net weight: 2.8 kg