RockBoard RBO E RPA 100 Attenuator Load Box
The RockBoard RPA 100 Power Attenuator 100 W solves the classic tube-amp dilemma: how to enjoy cranked power-tube saturation at bedroom or apartment volume. This compact 1.55 kg unit sits between the amp head and the cabinet, absorbing excess wattage so the amp can stay in its sweet spot while the room hears a much quieter signal. It also doubles as a recording DI box, a silent-practice rig with headphone output, and a cab-sim-equipped line interface.
- 100 W power handling — tames tube amps up to 100 watts while preserving the natural power-amp compression and breakup.
- Three impedance inputs (4 / 8 / 16 Ohm) match the attenuator to virtually any cabinet configuration without rewiring.
- Built-in DI, line out, headphone output, and AUX input — practice silently, record direct, or jam along with backing tracks.
- Switchable 2x12" and 4x12" cab simulation inspired by a V30/SM57 microphone combination.
RockBoard RPA 100 Power Attenuator — Tube-Amp Tone at Any Volume
The RockBoard RPA 100 Power Attenuator 100 W is a power attenuator and dummy load that lets players push a tube amplifier into its sweet spot and then reduce the speaker output to a level that suits the room. Sitting between the amp's speaker output and the cabinet, the unit absorbs part of the wattage so the amp can stay cranked while the room hears a much quieter signal. With 4, 8, and 16 ohm inputs, the amp always sees the correct speaker impedance.
What Sets This Attenuator Apart
Beyond simple volume reduction, the unit doubles as a recording and silent-practice hub. A switchable cabinet simulation inspired by a V30/SM57 microphone combination lets the player send a direct, mic-ready signal to a mixer or audio interface without a real cabinet and microphone. An integrated fan and overload LED keep the internal load resistors cool and warn when the attenuator is being pushed beyond its safe operating range. The combination of DI out, line out, headphone output, and AUX input turns a single small box into a complete amp-management solution.
Power Handling and Speaker Impedance
Matching the attenuator to the amplifier's output stage is critical for both tone and tube-amp safety. The unit accepts up to 100 watts of input power and offers three dedicated impedance taps so the output transformer always sees a correct load.
- Maximum Input Power: 100 W — covers most common tube-amp head sizes.
- Impedance Inputs: 4 / 8 / 16 Ohm — three separate jacks match the amp without adapters.
- Two parallel 6.3 mm / 1/4" speaker outputs let the player drive one cabinet or two cabs at once from the same attenuated feed.
Recording Outputs and Cabinet Simulation
For home recordists and live players who want to skip the microphone, the unit provides a full set of analog outputs with optional cab simulation. The cab-sim voicing is inspired by a V30/SM57 combination, a popular studio pairing for rock and metal tones.
- DI Output: XLR — sends a direct signal to a console or audio interface.
- Line Output: 6.3 mm / 1/4" jack with level control — feeds an external power amp or IR loader.
- Switchable 2x12" / 4x12" cabinet simulation with V30/SM57 voicing and a dedicated bypass switch.
Silent Practice, Headphone Output, and Physical Specs
When the cabinet is unplugged entirely, the unit acts as a dummy load so the amp can run safely without sound. A headphone output and AUX input complete the practice rig for late-night playing.
- Headphone Output: 3.5 mm / 1/8" jack — silent monitoring of the attenuated amp signal.
- AUX Input: 3.5 mm / 1/8" — mix in backing tracks from a phone or media player.
- Dimensions: 180 x 160 x 125 mm (L x W x H, including feet and knobs).
- Weight: 1.55 kg — light enough to carry in a gig bag alongside an amp head.
- Power supply via an optional 9 V DC adapter (2.1 x 5.5 mm barrel, centre negative) — required only for headphone, DI, and line-out operation.
Who Should Buy the RockBoard RPA 100
The RPA 100 is the right choice for guitarists and bassists who own a tube amplifier and need to use it at home, in an apartment, or in any environment where full stage volume is not an option. Players who want to record direct without setting up a microphone and cabinet will appreciate the built-in cab simulation and XLR DI output. Home-studio producers tracking late at night will find the headphone output and AUX input useful for silent practice sessions with backing tracks. The 100-watt power rating covers most common tube amps from boutique combos to 100-watt heads.
Type
Power Supply
UK/EU Power supply included
No
Weight
1,55 kg
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
